GE French Door Refrigerator

Owner's Manual & Installation Guide

French Door Series

Installation Guide

Tools Needed:

  • Adjustable wrench
  • Level
  • Screwdrivers (flat and Phillips)
  • Tape measure
  • Water line kit (for ice maker)

Step-by-Step Installation

  1. Choose Installation Location: Select a location with proper ventilation, away from heat sources, and on a solid, level floor.
  2. Remove Packaging Materials: Remove all shipping materials, protective films, and tape from the refrigerator.
  3. Adjust Leveling Legs: Adjust the front leveling legs to ensure the refrigerator is level from front to back and side to side.
  4. Connect Water Supply: Connect the water supply line to the refrigerator's water inlet valve for ice maker and water dispenser operation.
  5. Electrical Connection: Connect to a properly grounded 120V, 60Hz, AC only outlet. Do not use an extension cord.
  6. Clearance Check: Ensure proper clearance (minimum 1 inch on sides, 2 inches at back, and 1 inch at top) for ventilation.
  7. Initial Setup: Allow the refrigerator to stand upright for 4 hours before plugging in. Set temperature controls and run initial ice maker cycle.
Warning: All installations must be performed by a qualified installer to ensure proper operation and maintain warranty coverage.

Specifications

Model Series GFD28GYNFS
Type French Door Refrigerator
Color Stainless Steel / Fingerprint Resistant
Total Capacity 27.8 cu. ft.
Fresh Food Capacity 18.2 cu. ft.
Freezer Capacity 9.6 cu. ft.
Noise Level 39 dB
Control Type Electronic Touch Controls
Energy Rating ENERGY STAR® Certified
Annual Energy Consumption 608 kWh/year
Power Requirements 115V, 60Hz, 7.5A
Dimensions (HxWxD) 70 x 36 x 35 inches
Weight 330 lbs
Ice Maker Type Built-in Automatic Ice Maker

Warranty Information

  • Full Warranty: 1 year parts and labor
  • Sealed System Warranty: 5 years on compressor and related parts
  • Additional Coverage: Optional extended warranty available

For warranty service, contact GE Customer Service at 1-800-432-2737 or visit GEAppliances.com

Key Features

French Door Design

The convenient French door design provides easy access to fresh food items while maintaining optimal temperature consistency throughout the refrigerator compartment.

External Water & Ice Dispenser

Get filtered water and ice without opening the doors, helping to maintain consistent internal temperatures and reduce energy consumption.

Turbo Cool Setting

Quickly cools large amounts of recently added groceries to ensure food safety and preserve freshness.

Adjustable Gallon Door Bins

Spacious door bins accommodate gallon-sized containers and can be adjusted or removed for flexible storage options.

LED Lighting

Energy-efficient LED lighting provides bright, even illumination throughout both refrigerator and freezer compartments.

Humidity-Controlled Crispers

Separate humidity controls for each crisper drawer allow you to customize conditions for fruits, vegetables, and other produce.

Temperature Zones Explained

Fresh Food Section

Maintains optimal 37°F temperature for dairy, beverages, and most food items

Crisper Drawers

Humidity-controlled compartments for fruits and vegetables

Meat & Deli Drawer

Separate temperature-controlled drawer for meats and deli items

Freezer Section

Maintains 0°F temperature for frozen food storage

Door Storage

Convenient access to frequently used items like condiments and beverages

Quick Freeze Zone

Special section for rapid freezing of fresh foods

Troubleshooting

Problem Possible Cause Solution
Refrigerator not cooling Power issue, temperature setting too high, dirty condenser coils Check power supply, adjust temperature settings, clean condenser coils
Ice maker not working Water supply issue, ice maker turned off, clogged filter Check water supply line, ensure ice maker is on, replace water filter
Water dispenser not working Clogged filter, frozen water line, water pressure issue Replace water filter, check for frozen lines, verify water pressure
Excessive frost in freezer Door not sealing properly, frequent door openings, high humidity Check door seals, reduce door openings, ensure proper ventilation
Unusual noises Uneven leveling, items vibrating, normal compressor sounds Level the refrigerator, secure items inside, recognize normal operating sounds
Water leaking on floor Clogged defrost drain, damaged water line, improper installation Clear defrost drain, check water connections, verify proper installation

Error Codes

  • E0 / F0: Temperature sensor failure - Contact service center
  • E1 / F1: Freezer temperature too high - Check door seal and temperature setting
  • E2 / F2: Fresh food temperature too high - Check door seal and temperature setting
  • E3 / F3: Defrost system issue - Contact service center
  • E4 / F4: Ice maker communication error - Reset ice maker
  • E5 / F5: Water dispenser communication error - Check water supply and filter

Manual Downloads

Current Model Manuals

GFD28GYNFS

27.8 cu. ft. French Door Refrigerator

GFD26GYNFS

26.2 cu. ft. French Door Refrigerator

GFD30GYNFS

30.1 cu. ft. French Door Refrigerator

GFD28GYNBB

27.8 cu. ft. Black French Door

Popular Previous Models

GFD25HGTAWW

25.6 cu. ft. French Door Refrigerator

GFD28HSKSS

28.2 cu. ft. Stainless Steel

GFD26GSHSS

26.1 cu. ft. Smart Refrigerator

GFD24GYHFS

24.5 cu. ft. Counter Depth

Note: For models not listed here, please visit the GE Appliances Support Website for complete documentation.