Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pliers
- Tape measure
Step-by-Step Installation
- Choose Installation Location: Place on a solid, level floor near water and electrical connections with proper ventilation.
- Remove Shipping Materials: Remove all shipping bolts, brackets, and packing materials from the washer.
- Connect Water Supply: Connect hot and cold water inlet hoses to corresponding faucets. Use GE recommended hoses.
- Connect Drain Hose: Install drain hose into standpipe or laundry tub with proper height to prevent siphoning.
- Electrical Connection: Connect to a grounded 120V, 60Hz outlet. Do not use extension cords or adapters.
- Level the Washer: Adjust the four leveling legs to ensure washer is perfectly level in all directions.
- Initial Test Run: Run a calibration cycle to check for leaks, proper operation, and balance.
Specifications
| Model Series | GFW850SPNRS |
| Type | Front Load Washer |
| Color | Slate / Stainless Steel |
| Capacity | 9.2 kg (20.3 lbs) |
| Noise Level (Wash/Spin) | 52 dB / 68 dB |
| Control Type | Touch Controls with LED Display |
| Energy Rating | ENERGY STAR® Certified |
| Water Consumption | 3,900 gallons/year |
| Power Requirements | 120V, 60Hz, 15A |
| Dimensions (HxWxD) | 39 x 27 x 33 inches |
| Weight | 205 lbs |
| Max Spin Speed | 1300 RPM |
Warranty Information
- Full Warranty: 1 year parts and labor
- Drive System Warranty: 5 years on motor and transmission
- Additional Coverage: GE Factory Service plans available
For warranty service, contact GE Appliances at 1-800-432-2737 or visit GEAppliances.com
Key Features
UltraFresh Vent System
GE's exclusive venting system with OdorBlock™ technology keeps the washer drum fresh by allowing air circulation after cycles complete.
SmartDispense™ Technology
Automatically dispenses the perfect amount of detergent, softener, and bleach for up to 32 loads, eliminating waste and guesswork.
Microban® Antimicrobial Technology
Built-in antimicrobial protection in the washer tub and dispenser helps prevent the growth of odor-causing bacteria and mold.
Stainless Steel Wash Drum
Durable stainless steel construction resists chipping and rusting while providing gentle care for all fabric types.
SmartHQ™ Enabled
Connect to your home Wi-Fi to monitor cycles, receive alerts, download new cycles, and troubleshoot issues from your smartphone.
Fast Wash
Wash small loads in as little as 30 minutes with the Fast Wash cycle, using optimized water levels and wash motions.
Wash System Technology
Precision Wash
Automatically senses load size and soil level to optimize water usage and cycle time
Allergen
Cycle uses extra rinses and higher temperatures to remove common allergens
Sanitize
Eliminates 99.9% of bacteria using hot water and extended wash time
Deep Fill
Allows manual selection of water level for heavily soiled or bulky items
Delicates
Gentle wash motion with lower spin speed for delicate fabrics
Heavy Duty
Powerful cleaning action for heavily soiled work clothes and textiles
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Washer won't start | Power interruption, door not latched, control lock activated | Check power, ensure door click, deactivate control lock |
| Clothes still wet after spin | Overloaded, drain issue, unbalanced load | Reduce load size, check drain hose, redistribute clothes |
| Water not filling | Water supply valves closed, inlet screens clogged | Open water valves, clean inlet filters |
| Leaking water | Loose hose connections, damaged door seal | Tighten connections, inspect and clean door seal |
| Loud noises during operation | Foreign objects in drum, unbalanced load | Check drum for objects, redistribute load evenly |
| Error codes displayed | Various system faults detected | Refer to error code chart in manual, reset washer |
Common Error Codes
- E01: Water fill time exceeded - Check water supply and pressure
- E02: Drain time exceeded - Check drain hose and pump
- E03: Unbalanced load - Redistribute clothes and restart
- E04: Door lock fault - Ensure door is properly closed
- E05: Motor fault - Contact GE service
- E06: Temperature sensor fault - Run diagnostic cycle
Manual Downloads
Current Profile Model Manuals
GFW850SPNRS
9.2kg Smart Front Load Washer
GFW650SPNRS
9.2kg Front Load Washer
GFW550SSKWW
9.2kg White Front Load
GFW450SPMDG
9.2kg Slate Front Load
Popular Previous Models
GFW1480SMWW
9.2kg Profile Washer
GFW1460SWWW
9.2kg White Washer
GFW1450SSHWW
9.2kg Smart Washer
GFW1350SOWW
8.8kg Front Load Washer