Opal Nugget Ice Maker

User Manual & Installation Guide

Countertop Ice Maker

Installation Guide

Tools Needed:

  • Level
  • Measuring tape
  • Clean cloth
  • Water filter (if included)
  • Power cord

Step-by-Step Installation

  1. Choose Installation Location: Place on a flat, stable, level surface near a power outlet. Allow at least 4 inches of clearance on all sides for proper ventilation.
  2. Remove Packaging Materials: Remove all protective films, tapes, and packaging materials from the ice maker.
  3. Clean Interior: Wipe the interior with a clean, damp cloth before first use.
  4. Water Connection: Fill the water reservoir with clean, filtered water. Do not exceed the maximum fill line.
  5. Electrical Connection: Plug into a dedicated 120V, 60Hz grounded outlet. Do not use an extension cord or power strip.
  6. Initial Setup: Press the power button and select your preferred ice size setting.
  7. First Ice Production: The first batch of ice may take 15-20 minutes. Discard the first batch as recommended.
Warning: Ensure proper ventilation around the unit. Do not install in direct sunlight or near heat sources. For best performance, use filtered water.

Specifications

Model Series OPAL-01 / GEOP101
Type Countertop Nugget Ice Maker
Color Stainless Steel / Black
Ice Production Up to 24 lbs per day
Ice Storage Capacity 3 lbs
Noise Level 45 dB
Control Type Touch Controls with Digital Display
Ice Type Chewable Nugget Ice
Water Consumption 0.5 gallons per lb of ice
Power Requirements 120V, 60Hz, 2.5A
Dimensions (HxWxD) 16.5 x 14.2 x 16.9 inches
Weight 23.5 lbs
Water Reservoir 2.5 liters

Warranty Information

  • Full Warranty: 1 year parts and labor
  • Compressor Warranty: 3 years on ice making system
  • Additional Coverage: Optional extended warranty available

For warranty service, contact Customer Service at 1-800-555-OPAL or visit OpalIceMaker.com

Key Features

Nugget Ice Technology

Produces the perfect chewable, crunchy nugget ice that's soft yet durable, ideal for beverages and therapeutic use.

Rapid Ice Production

Creates fresh ice in as little as 15 minutes, producing up to 24 pounds of ice per day for continuous supply.

Smart Ice Making

Automatically stops ice production when the storage bin is full and resumes when ice level drops.

Self-Cleaning Function

Built-in cleaning cycle helps maintain hygiene and optimal performance with minimal effort.

Adjustable Ice Size

Choose between small, medium, and large nugget sizes to suit different preferences and uses.

Quiet Operation

Advanced noise reduction technology ensures quiet operation at only 45 dB, suitable for any room.

Ice Types & Uses

Small Nuggets

Perfect for cocktails, sodas, and quick cooling of beverages

Medium Nuggets

Ideal for water glasses, iced coffee, and everyday use

Large Nuggets

Great for coolers, therapeutic use, and slow-melting applications

Chewable Texture

Soft yet crunchy texture that's easy to chew and doesn't damage teeth

Slow Melting

Dense ice structure melts slower than traditional ice cubes

Versatile Use

Suitable for beverages, first aid, post-surgery, and sensory needs

Troubleshooting

Problem Possible Cause Solution
Ice maker won't start Power issue, water reservoir empty Check power connection, ensure water reservoir is filled to proper level
Slow ice production Room temperature too warm, water temperature too high Move to cooler location, use colder water, ensure proper ventilation
Ice tastes unusual Old water, need cleaning, water quality issues Change water daily, run cleaning cycle, use filtered water
Machine making noise Uneven surface, ice jam, normal operation sounds Level the unit, check for ice jams, some noise is normal during ice harvest
Ice too small or misshapen Water level low, mineral buildup, need adjustment Maintain proper water level, clean unit, adjust ice size setting
Display error codes Various system issues detected Refer to error code section below, reset unit if necessary

Error Codes

  • E1: Water shortage - Refill water reservoir
  • E2: Ice full - Ice bin needs to be emptied
  • E3: Ice jam - Clear ice from the mechanism
  • E4: Overheating - Allow unit to cool, check ventilation
  • E5: Motor issue - Contact service center
  • E6: Sensor error - Unplug for 5 minutes, then restart

Manual Downloads

Current Model Manuals

OPAL-01

Original Nugget Ice Maker

OPAL-02

Nugget Ice Maker Pro

GEOP101

Opal by GE Version

OPAL-01S

Stainless Steel Edition

Popular Accessories

OPAL-FILTER

Replacement Water Filter

Download Guide

OPAL-CLEAN

Cleaning Kit Manual

OPAL-SCOOP

Ice Scoop & Accessories

OPAL-CARE

Maintenance Guide

Note: For models not listed here, please visit the Opal Support Website for complete documentation and accessory information.