GE Refrigerator GNE27JYMFS User Manual

The GE GNE27JYMFS is a 27 cubic foot French Door refrigerator featuring external water and ice dispenser, fingerprint-resistant stainless steel finish, Turbo Cool and Turbo Freeze settings, adjustable gallon door bins, spill-proof glass shelves, humidity-controlled crispers, LED lighting, and a factory-installed water filter. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Using the Water & Ice Dispenser 7. Food Storage Tips 8. Care & Cleaning 9. Replacing the Water Filter 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: French doors with external dispenser, adjustable interior shelves and bins, ice maker, water filter system, and electronic controls.

Feature	Description
External Dispenser	Provides chilled water and ice (cubed or crushed) without opening doors
Fingerprint-Resistant Finish	Stainless steel exterior designed to resist smudges
Turbo Cool/Turbo Freeze	Rapidly cools refrigerator or freezer compartments when activated
Adjustable Gallon Door Bins	Can be repositioned to accommodate large containers
Spill-Proof Glass Shelves	Tempered glass shelves with raised edges to contain spills
Humidity-Controlled Crispers	Sealed drawers with adjustable vents to preserve produce freshness
LED Interior Lighting	Energy-efficient, bright lighting for better visibility
Factory-Installed Water Filter	Reduces contaminants for improved water and ice taste
Ice Maker	Automatic ice production with shut-off arm
Electronic Controls	Touchpad interface for temperature and feature settings

Installation

Unpack and inspect contents. Ensure proper location and clearances.

Position the refrigerator: Allow at least 1 inch of clearance on sides and back for ventilation.
Level the refrigerator: Adjust the front leveling legs so doors close and seal properly.
Connect to water supply: Attach the copper water line to the shut-off valve and refrigerator inlet.
Plug into a dedicated 120V AC, 15-amp grounded outlet.
Allow 24 hours for the ice maker to produce the first batch of ice.

WARNING! The refrigerator is heavy; use two people to move it. Ensure the water line connection is tight to prevent leaks.

First-Time Setup

After installation, power on the refrigerator and configure initial settings.

Set temperatures: Press the TEMPERATURE pad. Default is 37°F for fridge and 0°F for freezer.
Enable Turbo Cool/Freeze: Press the respective pad for rapid cooling if needed.
Lock the controls: Press and hold the LOCK pad for 3 seconds to prevent accidental changes.
Flush the water system: Dispense and discard the first 2 gallons of water to clear the system.

CAUTION! Do not load food until the refrigerator has reached the set temperatures.

Specifications

Model: GNE27JYMFS
Capacity: 27 cubic feet total (18 cu. ft. refrigerator, 9 cu. ft. freezer)
Dimensions (HxWxD): 70" x 36" x 34.5"
Door Style: French Doors with bottom freezer drawer
Finish: Fingerprint-Resistant Stainless Steel
Dispenser: Water and Ice (Cubed/Crushed) through the left door
Water Filter: Model RPWFE (factory-installed)
Annual Energy Use: [Estimated kWh - refer to Energy Guide label]
Power Source: 120V AC, 60Hz

Controls and Settings

Access all settings via the touchpad control panel located on the exterior dispenser panel.

Control Panel: POWER, TEMPERATURE (Fridge/Freezer), TURBO COOL, TURBO FREEZE, LOCK, FILTER RESET, ICE TYPE (Cubed/Crushed), LIGHT.

Temperature Settings: Adjustable range for fridge (34°F to 46°F) and freezer (-5°F to 5°F). Turbo Modes: Temporarily boost cooling performance for 24 hours or until turned off. Control Lock: Disables the control panel to prevent unintended changes. Filter Reset: Press and hold for 3 seconds after replacing the water filter. Dispenser Light: Turns the dispenser area light on/off.

Using the Water & Ice Dispenser

Dispense chilled water or ice without opening the refrigerator doors.

Select ice type: Press ICE TYPE to choose between cubed or crushed ice.
For water: Press a glass against the water paddle. Release to stop.
For ice: Press a glass against the ice paddle. The dispenser will release ice until the paddle is released.
To turn off ice dispensing: Lift the freezer door ice maker shut-off arm.

Tip: The first ice production may take up to 24 hours. Discard the first few batches.

Food Storage Tips

Organize food to maximize freshness and energy efficiency.

Refrigerator Shelves: Store ready-to-eat foods, dairy, and leftovers on upper shelves.
Crispers: Use for fruits and vegetables. Adjust humidity slider: High for veggies, Low for fruits.
Door Bins: Ideal for condiments, juices, and other items with natural preservatives.
Freezer Drawer: Organize with frozen foods in original packaging. Use the quick-freeze area if available.
Allow hot foods to cool before placing them in the refrigerator.

WARNING! Do not overpack shelves; allow air to circulate for proper cooling.

Care & Cleaning

Unplug before cleaning interior components. Use mild soap and water; avoid abrasive cleaners.

Exterior: Wipe with a damp cloth and dry. Use a stainless steel cleaner for the finish if desired.
Interior: Remove shelves and bins. Wash with warm, soapy water. Rinse and dry.
Dispenser Area: Wipe spills immediately. Clean the drip tray regularly.
Condenser Coils: Vacuum the rear or front base grille every 6-12 months.

CAUTION! Do not use harsh chemicals, ammonia, or bleach on stainless steel or plastic parts.

Replacing the Water Filter

Replace the water filter every 6 months or when the FILTER indicator light comes on.

Locate the filter: Inside the refrigerator compartment, upper left rear wall.
Turn the old filter counterclockwise to remove. Discard it.
Insert the new filter (RPWFE). Align arrows and turn clockwise until it clicks.
Flush the system: Dispense and discard 2 gallons of water.
Reset the filter indicator: Press and hold the FILTER RESET pad for 3 seconds.

WARNING! Do not use the dispenser without a filter installed.

Regulatory Information

This appliance complies with FCC Part 15, Subpart B. It may not cause harmful interference and must accept any interference received. Manufactured under license from GE. For support, visit www.geappliances.com or contact GE Appliances at 1-800-432-2737.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Refrigerator not cooling	Power/controls/Turbo mode off	Ensure unit is plugged in; check circuit breaker; verify temperature settings; enable Turbo Cool if needed.
Water dispenser not working	Filter/water supply/kink	Replace water filter; ensure water supply valve is on; check for kinks in the line.
Ice maker not producing ice	Shut-off arm/temperature/filter	Ensure shut-off arm is down; ensure freezer is at 0°F; replace water filter.
Dispenser light is off	Control setting	Press the LIGHT pad on the control panel to turn it on.
Unusual noise	Leveling/items touching	Ensure refrigerator is level; check if items inside are touching walls or shelves.

Reset: Unplug the refrigerator for 5 minutes, then plug it back in.

Service: 1-800-432-2737; www.geappliances.com