Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pliers
- Tape measure
- Pipe thread seal tape
Step-by-Step Installation
- Choose Installation Location: Select a location with proper ventilation, near necessary plumbing and electrical connections on a solid, level floor.
- Remove Shipping Materials: Remove all shipping bolts, transit bars and packaging materials from the combo unit.
- Connect Water Supply: Connect hot and cold water supply lines to the water inlet valves. Use only new hoses and apply pipe thread seal tape.
- Connect Drain Hose: Route the drain hose into a standpipe or laundry tub with a high loop to prevent backflow and siphoning.
- Ventilation Setup: For drying functions, ensure proper venting according to local building codes (if vented model).
- Electrical Connection: Connect to a properly grounded 240V, 60Hz, dedicated circuit. Do not use an extension cord or adapter.
- Level the Combo Unit: Adjust the leveling feet to ensure the unit is level from front to back and side to side.
- Test Run: Run the unit through a complete wash and dry cycle to check for leaks and proper operation.
Specifications
| Model Series | GFW850SPNRS / GFW850SPNDG |
| Type | Front Load Washer Dryer Combo |
| Color | Stainless Steel / Diamond Gray |
| Wash Capacity | 4.8 cu. ft. |
| Dry Capacity | 7.4 cu. ft. |
| Noise Level (Wash/Spin) | 55 dB / 72 dB |
| Control Type | Touch Controls with LED Display |
| Energy Rating | ENERGY STAR® Certified |
| Water Consumption | 13 gallons per cycle (average) |
| Power Requirements | 240V, 60Hz, 30A (dedicated circuit) |
| Dimensions (HxWxD) | 74 x 27 x 32 inches |
| Weight | 210 lbs |
| Max Spin Speed | 1300 RPM |
| Dryer Type | Vented or Ventless (model dependent) |
Warranty Information
- Full Warranty: 1 year parts and labor
- Motor Warranty: 10 years on drive motor
- Control Board: 5 years
- Additional Coverage: Optional extended warranty available
For warranty service, contact GE Appliances Customer Service at 1-800-432-2737 or visit GEAppliances.com
Key Features
All-in-One Design
Combines washing and drying functions in a single unit, saving space and allowing continuous laundry processing without transferring clothes.
SmartDispense™ Technology
Automatically dispenses the perfect amount of detergent and fabric softener for up to 32 loads, eliminating measuring and waste.
Microban® Antimicrobial Technology
Built-in antimicrobial protection helps prevent the growth of odor-causing bacteria, mold, and mildew on the washer drum and gasket.
Steam Refresh
Steam technology reduces wrinkles and odors in dry clothes, refreshing garments without a full wash cycle.
SmartHQ™ Connectivity
Wi-Fi enabled for remote control via smartphone app, allowing you to start cycles, monitor progress, receive alerts, and download new cycles.
UltraFresh Vent System
Keeps the door gasket and drum fresh by using air circulation to dry these areas after cycles complete, preventing mold and mildew.
Wash & Dry Programs
Normal
For everyday cotton and mixed fabric loads with moderate soil
Quick Wash & Dry
Complete wash and dry cycle in under 60 minutes for small loads
Heavy Duty
Intensive cleaning for heavily soiled work clothes and linens
Delicates
Gentle cycle for lingerie, silk, and other delicate fabrics
Bedding
Special cycle for comforters, sheets, and pillowcases
Sanitize
Uses high temperatures to eliminate 99.9% of bacteria
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit won't start | Power issue, door not closed, control lock activated | Check power supply, ensure door is latched, check control lock |
| Clothes still wet after drying | Overloading, lint filter clogged, incorrect cycle | Reduce load size, clean lint filter, select appropriate dry cycle |
| Water not draining | Drain hose clogged or kinked, pump filter blocked | Check drain hose for obstructions, clean pump filter |
| Leaking water | Door not sealed, overfilling, loose connections | Check door seal, ensure proper detergent amount, check connections |
| Unusual noises during spin | Foreign objects in drum, unbalanced load | Check for foreign objects, redistribute load evenly |
| Error code displayed | Various system faults detected | Refer to error code list below, contact service if persistent |
| Poor drying performance | Ventilation issue, overloaded, high humidity | Check venting, reduce load size, use extended dry time |
Error Codes
- E01 / F01: Water supply issue - Check water supply and inlet valve
- E02 / F02: Drain issue - Check drain hose and pump
- E03 / F03: Door lock failure - Door not locking properly
- E04 / F04: Motor control issue - Contact service center
- E05 / F05: Temperature sensor failure
- E06 / F06: Heater element issue (dryer function)
- E07 / F07: Communication error - Power cycle unit
- E08 / F08: Unbalanced load - Redistribute clothes
Manual Downloads
Current Model Manuals
GFW850SPNRS
Profile™ 4.8 cu. ft. Combo Stainless
GFW850SPNDG
Profile™ 4.8 cu. ft. Combo Diamond Gray
GFW845SPNRS
Profile™ 4.5 cu. ft. Smart Combo
GFW840SPNWS
Profile™ 4.2 cu. ft. Combo White
Popular Previous Models
GFW1480SMWW
4.8 cu. ft. Washer Dryer Combo
GFW1460SMWW
4.5 cu. ft. Smart Combo
GFW1450SMWW
4.2 cu. ft. Washer Dryer Combo
GFW1420SMWW
4.0 cu. ft. Stackable Combo