Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pliers
- Tape measure
- Pipe thread seal tape
Step-by-Step Installation
- Choose Installation Location: Select a location with proper ventilation, near necessary plumbing and electrical connections on a solid, level floor.
- Remove Shipping Materials: Remove all shipping bolts, transit bars and packaging materials from the combo unit.
- Connect Water Supply: Connect hot and cold water supply lines to the water inlet valves. Use only new hoses and apply pipe thread seal tape.
- Connect Drain System: Install the drain hose with a high loop to prevent backflow. Ensure proper venting for drying function.
- Electrical Connection: Connect to a dedicated 120V, 60Hz, 15-20 amp grounded outlet. Do not use an extension cord or adapter.
- Ventilation Setup: Install proper venting for moisture removal during drying cycles according to local building codes.
- Level the Unit: Adjust the leveling legs to ensure the combo unit is perfectly level from front to back and side to side.
- Test Run: Run both wash and dry cycles to check for leaks, proper operation, and adequate ventilation.
Specifications
| Model Series | GUD27ESSMWW / GUD27ESSMBB |
| Type | Front Load Washer Dryer Combo |
| Color | White / Black |
| Wash Capacity | 4.8 cu. ft. |
| Dry Capacity | 4.8 cu. ft. |
| Noise Level (Wash/Dry) | 55 dB / 65 dB |
| Control Type | Touch Controls with LED Display |
| Energy Rating | ENERGY STAR® Certified |
| Water Consumption | 13 gallons per cycle (average) |
| Power Requirements | 120V, 60Hz, 15A |
| Dimensions (HxWxD) | 74 x 27 x 30 inches |
| Weight | 185 lbs |
| Max Spin Speed | 1300 RPM |
| Dryer Type | Vented or Ventless Options |
Warranty Information
- Full Warranty: 1 year parts and labor
- Motor Warranty: 10 years on drive motor
- Additional Coverage: Optional 5-year extended warranty available
For warranty service, contact GE Appliances Customer Service at 1-800-432-2737 or visit GEAppliances.com
Key Features
All-in-One Design
Space-saving combination unit that washes and dries clothes in the same drum, eliminating the need for two separate appliances.
Microban® Antimicrobial Technology
Built-in antimicrobial protection helps prevent the growth of odor-causing bacteria, mold, and mildew on the washer drum.
SmartDispense™ Technology
Automatically dispenses the right amount of detergent, softener, and bleach for up to 32 loads, ensuring optimal cleaning results.
Steam Refresh
Steam function helps reduce wrinkles, remove odors, and refresh clothes without a full wash cycle, saving time and energy.
SmartHQ™ Connectivity
Wi-Fi enabled for remote control via smartphone app, allowing you to start, stop, monitor cycles, and receive maintenance alerts.
UltraFresh Vent System
Keeps the door seal and drum fresh by using air circulation to dry out residual moisture after cycles complete.
Wash & Dry Programs
Normal Wash & Dry
Complete cycle for everyday fabrics with automatic drying
Quick Wash & Dry
Fast 30-minute cycle for lightly soiled items
Heavy Duty
Intensive cleaning for heavily soiled work clothes and towels
Delicates
Gentle cycle for silk, lace, and other delicate fabrics
Bedding
Special cycle for comforters, sheets, and pillowcases
Sanitize
High-temperature cycle that eliminates 99.9% of bacteria
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit won't start | Power issue, door not closed, child lock engaged | Check power supply, ensure door is latched, disable child lock |
| Clothes still wet after drying | Overloading, lint filter clogged, improper venting | Reduce load size, clean lint filter, check vent system |
| Water not draining | Drain hose clogged, pump filter blocked | Check drain hose for obstructions, clean pump filter |
| Excessive vibration | Unbalanced load, uneven floor, shipping bolts not removed | Redistribute load, level the unit, ensure shipping bolts removed |
| Error codes displayed | System malfunction, sensor issues | Refer to error code list below, reset unit |
| Musty odor | Moisture buildup, need cleaning cycle | Run cleaning cycle, leave door open between uses, clean detergent dispenser |
Error Codes
- E01 / F01: Water supply issue - Check water supply and inlet valve
- E02 / F02: Drain issue - Check drain hose and pump
- E03 / F03: Temperature sensor failure - Contact service
- E04 / F04: Motor control issue - Reset unit, contact service if persists
- E05 / F05: Door lock malfunction - Ensure door closes properly
- E06 / F06: Communication error - Reset unit by unplugging for 5 minutes
- E07 / F07: Heating element issue - Contact service center
- E08 / F08: Moisture sensor error - Check sensor, redistribute load
Manual Downloads
Current Model Manuals
GUD27ESSMWW
4.8 cu. ft. White Combo
GUD27ESSMBB
4.8 cu. ft. Black Combo
GUD24ESSMWW
2.4 cu. ft. Compact Combo
GUD27GSSMWW
4.8 cu. ft. Smart Combo
Popular Previous Models
GFW850SPNRS
5.0 cu. ft. Profile Combo
GFW148SSKWW
4.8 cu. ft. Ventless Combo
GFW450SPKRS
4.5 cu. ft. Stackable Unit
GFW850SPMDG
5.0 cu. ft. Dark Gray