Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pliers
- Tape measure
- Gas line wrench (for gas dryer models)
Step-by-Step Installation
- Choose Installation Location: Select a location near necessary plumbing, electrical, and venting connections on a solid, level floor.
- Remove Shipping Materials: Remove all shipping bolts and packaging materials from both washer and dryer units.
- Connect Water Supply: Connect hot and cold water supply lines to the washer's water inlet valves. Use only new hoses.
- Connect Drain Hose: Route the washer drain hose into a standpipe or laundry tub with a high loop to prevent backflow.
- Dryer Vent Installation: Install rigid or flexible metal venting to exhaust dryer to outdoors. Maintain proper clearances.
- Electrical Connection: Connect washer to a properly grounded 120V, 60Hz outlet. Dryer requires 240V outlet for electric models.
- Gas Connection (if applicable): Connect gas line to dryer using approved flexible connector. Check for leaks with soap solution.
- Level the Units: Adjust leveling legs to ensure both washer and dryer are level from front to back and side to side.
- Test Run: Run both units through complete cycles to check for leaks, proper operation, and adequate venting.
Specifications
| Washer Model Series | GFW850SPNRS |
| Dryer Model Series | GFD850SPNRS |
| Type | Front Load Washer & Dryer Pair |
| Color | Slate / Stainless Steel |
| Washer Capacity | 5.0 cu. ft. |
| Dryer Capacity | 7.8 cu. ft. |
| Noise Level (Washer) | 52 dB / 68 dB |
| Control Type | Touch Controls with LED Display |
| Energy Rating | ENERGY STAR® Most Efficient |
| Water Consumption (Washer) | 13 gallons per load (average) |
| Power Requirements (Washer) | 120V, 60Hz, 15A |
| Power Requirements (Dryer) | 240V, 60Hz, 30A (Electric) / 120V, 60Hz (Gas) |
| Dimensions (HxWxD each) | 39 x 27 x 32 inches |
| Weight (Washer/Dryer) | 205 lbs / 150 lbs |
| Max Spin Speed | 1300 RPM |
Warranty Information
- Full Warranty: 1 year parts and labor
- Motor Warranty: 10 years on washer motor
- Drum Warranty: Lifetime limited warranty on stainless steel drum
- Additional Coverage: Optional 5-year extended warranty available
For warranty service, contact GE Appliances Customer Service at 1-800-432-2737 or visit GEAppliances.com
Key Features
SmartDispense™ Technology
Automatically dispenses the perfect amount of detergent, softener, and bleach for up to 32 loads, eliminating measuring and waste.
Microban® Antimicrobial Technology
Built-in antimicrobial protection helps prevent the growth of odor-causing bacteria, mold, and mildew on the washer gasket and dispensers.
Steam Refresh
Steam technology in both washer and dryer helps remove wrinkles, reduce odors, and refresh clothes without washing.
SmartHQ™ Technology
Wi-Fi enabled for remote control via smartphone app, allowing you to start, stop, monitor cycles, and receive alerts from anywhere.
UltraFresh Vent System
Keeps the washer door slightly ajar after cycles to allow air circulation, preventing mildew and odors.
Precision Dry
Dryer sensors detect moisture levels and automatically adjust drying time to prevent over-drying and save energy.
Wash Cycle Technology Explained
Smart Wash
Automatically selects optimal settings based on load size and soil level
Stainless Steel Drum
Gentle on fabrics while providing thorough cleaning performance
Allergen Cycle
Uses extra hot water and high-speed spins to remove common allergens
Quick Wash
Washes small loads in just 30 minutes for everyday items
Sanitize Cycle
Eliminates 99.9% of bacteria with high-temperature wash
Wrinkle Care
Reduces wrinkles by tumbling clothes periodically after cycle ends
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Washer won't start | Power issue, door not closed, child lock engaged | Check power supply, ensure door is latched, disable child lock |
| Dryer not heating | Gas supply off, circuit breaker tripped, vent clogged | Check gas valve, reset breaker, clean vent system |
| Water not draining | Drain hose clogged or kinked, pump filter blocked | Check drain hose for obstructions, clean pump filter |
| Excessive vibration | Unbalanced load, uneven floor, shipping bolts not removed | Redistribute load, level the machine, ensure shipping bolts removed |
| Clothes still wet after spin | Overloading, drain issue, unbalanced load | Reduce load size, check drain system, redistribute clothes |
| Error codes displayed | Various system faults detected | Refer to error code chart in manual, reset unit |
Error Codes
- E01: Water supply issue - Check water supply and inlet valve
- E02: Drain issue - Check drain hose and pump
- E03: Door lock failure - Ensure door closes properly
- E04: Motor control fault - Contact service center
- E05: Temperature sensor fault - Check heating system
- E06: Communication error - Reset washer and dryer
- E07: Unbalanced load - Redistribute clothes and restart
- E08: Overflow detected - Check for leaks and water supply
Manual Downloads
Current Model Manuals
GFW850SPNRS
5.0 cu. ft. Smart Front Load Washer
GFD850SPNRS
7.8 cu. ft. Smart Electric Dryer
GFD850GPNRS
7.8 cu. ft. Smart Gas Dryer
GFW550SSNRS
4.8 cu. ft. Front Load Washer
Popular Previous Models
GFW1480SSDWW
4.5 cu. ft. Front Load Washer
GFD1450SSDWW
7.4 cu. ft. Electric Dryer
GFW4600SSDWW
4.5 cu. ft. Smart Washer
GFD4600SSDWW
7.4 cu. ft. Smart Dryer