Installation Guide
Tools Needed:
- Torque wrench
- Multimeter
- Hex key set
- Wire strippers
- Leveling tool
- Service toolkit
Step-by-Step Installation
- Site Preparation: Ensure installation area meets GE Profile specifications for ventilation, electrical, and plumbing requirements.
- Unpack and Inspect: Remove all packaging materials and inspect unit for shipping damage before installation.
- Electrical Connection: Connect to dedicated circuit with proper voltage and amperage as specified in technical data plate.
- Gas Connection (if applicable): For gas models, connect to gas supply using approved fittings and check for leaks with soap solution.
- Water Connection: Connect water supply lines using provided fittings and ensure proper water pressure (20-120 psi).
- Ventilation Setup: Install proper ventilation system according to local codes and manufacturer specifications.
- Calibration: Perform initial calibration and test all functions before placing into service.
Specifications
| Model Series | PGS930SELSS / PGS930SEMSS |
| Product Line | GE Profile Professional Series |
| Finish | Stainless Steel / Black Stainless |
| Fuel Type | Natural Gas / Liquid Propane |
| BTU Input | 18,000 - 21,000 BTU |
| Control Type | Touch Controls with LED Display |
| Energy Rating | Energy Star Certified |
| Electrical Requirements | 120V, 60Hz, 15A Dedicated Circuit |
| Dimensions (HxWxD) | 36 x 30 x 27 inches |
| Weight | 185 lbs |
| Warranty Period | 1 Year Full / 5 Years Parts |
Warranty Information
- Full Warranty: 1 year parts and labor
- Extended Coverage: 5 years on sealed system components
- Professional Installation: Required for warranty validation
- Service Network: Authorized GE service technicians only
For warranty service, contact GE Appliances Service at 1-800-432-2737 or visit GEAppliances.com
Key Features
Precision Cooking System
Advanced temperature control with infrared sensors maintains precise cooking temperatures for professional-grade results.
Tri-Ring Burner
Three concentric burner rings provide flexible heat output from simmer to boil for versatile cooking performance.
SmartDispense™
Automated soap and rinse aid dispensing system with smart sensors for optimal cleaning performance.
ProBake Convection
Third heating element and fan system ensures even baking and roasting with perfect browning.
SmartHQ Technology
Wi-Fi enabled for remote diagnostics, software updates, and integration with smart home systems.
Scan-to-Cook
Using the SmartHQ app, scan food packaging for automatic cooking settings and recommendations.
Professional Cooking Modes
Sous Vide Mode
Precision temperature control for professional sous vide cooking results
Air Fry
Crispy results with up to 80% less fat using rapid air technology
Proof
Maintains perfect temperature and humidity for dough proofing
Slow Cook
Low temperature cooking for tenderizing meats and developing flavors
Dehydrate
Precise temperature control for drying fruits, vegetables, and herbs
Warm
Keeps food at perfect serving temperature without overcooking
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Appliance not powering on | Power supply issue, circuit breaker tripped | Check power connection, reset circuit breaker, verify voltage |
| Uneven cooking results | Calibration needed, improper rack placement | Run calibration cycle, follow rack placement guide |
| Error code display | Sensor failure, component malfunction | Note error code, consult service manual, contact technician |
| Gas ignition failure | Gas supply issue, igniter failure | Check gas supply, inspect igniter, clean burner ports |
| Display panel unresponsive | Control board issue, power surge | Reset appliance, check control board connections |
| Unusual noises during operation | Fan obstruction, loose components | Check for obstructions, tighten mounting hardware |
Common Error Codes
- F1: Oven temperature sensor failure - Replace sensor
- F2: Oven temperature too high - Check calibration
- F3: Oven temperature too low - Verify heating elements
- F4: Door lock mechanism failure - Inspect lock assembly
- F5: Control board communication error - Reset system
- F6: User interface error - Check display connections
- F7: Cooling fan failure - Inspect fan motor
- F8: Ventilation system error - Check vent path
Manual Downloads
Current GE Profile Models
PGS930SELSS
30" Gas Cooktop
PGS930SEMSS
30" Electric Cooktop
PVD28BYNFS
Dishwasher with SmartDispense
PFE28KYNFS
French Door Refrigerator
Popular Previous Models
PGS960SELSS
36" Professional Range
P2B930SEJSS
Double Wall Oven
PTD700SMSS
Smart Dryer
PFW450SPKDS
Front Load Washer