GE Profile PVD28BYNFS User Manual

The GE Profile PVD28BYNFS is a 28 cubic foot French Door Refrigerator with advanced features including external water and ice dispenser, dual evaporators, adjustable glass shelves, humidity-controlled crispers, gallon door bins, LED lighting, and energy-efficient operation. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Line 7. Using the Dispenser 8. Temperature Management 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: French doors, external ice and water dispenser, dual cooling systems, adjustable interior components, and smart temperature controls.

Feature	Description
External Dispenser	Provides filtered ice and water without opening doors
Dual Evaporators	Separate cooling systems for fridge and freezer
Adjustable Glass Shelves	Customizable storage space
Humidity-Controlled Crispers	Preserves freshness of fruits and vegetables
Gallon Door Bins	Holds large containers
LED Lighting	Energy-efficient interior lighting
Temperature Controls	Digital controls for precise temperature management
Ice Maker	Produces ice automatically
Water Filter	Removes impurities from drinking water
Energy Star Certified	Designed for energy efficiency

Installation

Unpack and inspect contents. Position refrigerator in desired location.

Remove packaging: Take off all tape, foam, and cardboard.
Level the refrigerator: Adjust leveling legs to ensure doors close properly.
Connect water line: Attach to cold water supply (if using dispenser).
Plug into dedicated 120V AC outlet.
Allow to stabilize: Let refrigerator stand upright for 2 hours before powering on.

WARNING! Refrigerator is heavy; use two people for moving. Ensure proper clearance for doors and ventilation.

First-Time Setup

Power on refrigerator; set initial configurations.

Set temperatures: Use digital controls to set fridge (37°F recommended) and freezer (0°F recommended).
Activate ice maker: Lift wire signal arm to start ice production.
Install water filter: Insert and flush according to instructions.
Organize interior: Adjust shelves and bins as needed.

CAUTION! Do not overload shelves. Allow space for air circulation.

Specifications

Capacity: 28 cubic feet total.
Dimensions: Height: 70 inches, Width: 36 inches, Depth: 35 inches.
Doors: French doors with bottom freezer drawer.
Water Filter: Model RPWFE (replace every 6 months).
Ice Production: Up to 4.5 lbs per day.
Energy Usage: Energy Star certified, 650 kWh/year estimated.
Power Source: 120V AC, 60Hz, 15A dedicated circuit.
Finish: Stainless steel exterior.

Controls and Settings

Access controls via digital display panel on exterior.

Display Panel: Temperature settings, filter reset, ice maker on/off, door alarm, diagnostic mode.

Temperature: Set fridge (34°F to 46°F) and freezer (-5°F to 5°F). Filter Reset: Press and hold for 3 seconds after replacing filter. Ice Maker: Toggle on/off. Door Alarm: Enable/disable alarm for open doors. Diagnostic: Hold buttons for 5 seconds to enter service mode.

Connecting Water Line

Required for ice and water dispenser operation.

Turn off main water supply.
Connect 1/4-inch copper or plastic tubing to cold water line.
Attach other end to refrigerator water valve.
Turn water on and check for leaks.
Flush system by dispensing water for 3 minutes.

Tip: Use manufacturer-approved water line kit. Ensure connections are tight.

Using the Dispenser

Provides ice (crushed or cubed) and filtered water.

Select ice type: Press CUBE or CRUSH button.
Dispense ice: Press lever against glass.
Dispense water: Press water button or lever.
Lock dispenser: Press and hold LOCK for 3 seconds to disable.

WARNING! Do not use dispenser without water filter installed. Keep children away from dispenser lever.

Temperature Management

Optimal temperatures ensure food safety and efficiency.

Fridge: 37°F recommended.
Freezer: 0°F recommended.
Adjust via digital controls.
Allow 24 hours for temperatures to stabilize after adjustment.

Note: Temperatures may vary based on room conditions and door usage.

Care & Cleaning

Unplug before cleaning interior. Use mild detergent and warm water for surfaces.

Exterior: Wipe with stainless steel cleaner (if applicable).
Interior: Remove shelves and bins; clean with baking soda solution.
Condenser coils: Vacuum every 6 months (located at back or bottom).
Dispenser: Wipe with damp cloth; clean ice bin monthly.

CAUTION! Do not use abrasive cleaners. Never steam clean.

Regulatory Information

UL listed; complies with FCC Part 15 for digital devices. Energy Star partner. Copyright © 2025 GE Appliances; trademarks of Haier US Appliance Solutions, Inc. For support, visit www.geappliances.com or contact 1-800-432-2737.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dispenser not working	Water line/filter	Check water supply; replace filter; ensure dispenser unlocked.
Ice maker not producing	Signal arm/freezer temp	Lower signal arm; ensure freezer at 0°F; wait 24 hours.
Refrigerator not cooling	Power/temp settings	Check power cord; ensure proper temperature settings.
Water leaking	Connections/defrost drain	Tighten water line; clear defrost drain tube.
Loud noises	Leveling/ice maker	Level refrigerator; ice maker sounds are normal during cycle.

Reset: Unplug for 5 minutes, then plug back in.

Service: 1-800-432-2737; www.geappliances.com