Parts Installation Guide
Tools Needed:
- Phillips screwdriver set
- Flathead screwdriver
- Nut driver set
- Multimeter
- Torx bit set
- Safety gloves
Step-by-Step Parts Replacement
- Safety First: Disconnect power supply at circuit breaker before beginning any repair work.
- Access Panel Removal: Remove rear access panel screws to access internal components.
- Bake/Broil Element Replacement: Remove mounting screws, disconnect wires, and install new element with proper alignment.
- Thermal Fuse Installation: Locate thermal fuse near vent, disconnect wires, and replace with identical rated fuse.
- Control Board Replacement: Document wire connections, remove old board, and install new board with identical wiring.
- Door Seal Replacement: Remove old gasket from channel, clean surface, and install new seal without stretching.
- Temperature Sensor Calibration: Install new sensor, run calibration cycle, and verify temperature accuracy.
Oven Specifications
| Model Series | PGB935, PGB945, PGB955 Series |
| Oven Type | Electric Convection / Gas Convection |
| Color Options | Stainless Steel / Black Stainless / White |
| Capacity | 5.3 - 6.0 cu. ft. |
| Power Requirements | 240V, 50A (Electric) / Natural/LP Gas |
| Control Type | Touch Controls with Digital Display |
| Convection System | Third Element True European Convection |
| Temperature Range | 170°F - 550°F (77°C - 288°C) |
| Broil Element Wattage | 3400 Watts |
| Bake Element Wattage | 2800 Watts |
| Dimensions (HxWxD) | 46 x 30 x 28 inches |
| Weight | 145 lbs |
Warranty Information
- Full Warranty: 1 year parts and labor
- Elements Warranty: 5 years on bake and broil elements
- Control Warranty: 3 years on electronic controls
- Additional Coverage: GE extended service plans available
For warranty parts replacement, contact GE Appliances at 1-800-432-2737 or visit GEAppliances.com
Key Components
Convection System
Third element true European convection with fan and heating element for even baking and roasting. Includes convection baffle and fan motor assembly.
Precision Cooking System
Advanced temperature sensing and control system with dual thermistors for accurate oven temperature management and consistent cooking results.
Touch Control Panel
Full glass touch controls with LED display. Includes main control board, touchpad assembly, and display module for intuitive operation.
Heating Elements
High-wattage bake and broil elements with quick-heat technology. Available in various wattages for different model configurations.
Door Assembly
Triple-pane glass door with cool-touch technology. Includes door gasket, hinges, springs, and glass panels for replacement.
Rack & Guide System
Heavy-duty oven racks with glide supports and rack guides. Available in various sizes and configurations for different oven models.
Common Replacement Parts
WB24X10025
Bake Element - 2800W for electric models
WB24X10026
Broil Element - 3400W for electric models
WB24X10223
Convection Fan Motor Assembly
WB24X10224
Oven Temperature Sensor
WB24X10225
Door Gasket Seal
WB24X10226
Control Board Assembly
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Oven not heating | Failed bake element, thermal fuse, control board | Test elements with multimeter, check thermal fuse, verify control board output |
| Uneven cooking | Convection fan failure, temperature sensor calibration | Test convection fan operation, calibrate temperature sensor |
| Display not working | Control board failure, power supply issue | Check power at outlet, test control board voltages |
| Door not closing properly | Worn hinges, damaged gasket, misaligned latch | Inspect hinges and gasket, adjust door alignment |
| Error codes displayed | Sensor failure, communication error, component failure | Reference error code chart, test indicated components |
| Convection fan noisy | Worn bearings, obstruction in fan, motor failure | Inspect for obstructions, test fan motor, replace if necessary |
Error Codes
- F1: Oven temperature sensor failure - Replace temperature sensor
- F2: Oven temperature too high - Check elements and temperature sensor
- F3: Oven temperature too low - Check elements and temperature sensor
- F4: Oven communication error - Check wiring and control board
- F5: Control panel communication error - Check ribbon cables and connections
- F7: Convection fan error - Check fan motor and wiring
Parts Manual Downloads
Current Model Parts Manuals
PGB935SEMSS
30" Slide-In Electric Convection
PGB945SELSS
30" Slide-In Electric Double Oven
PGB955SELSS
30" Smart Slide-In Electric
PGB930SELSS
30" Freestanding Electric
Popular Previous Models
JGBS86REKSS
30" Gas Range with Convection
JGBS66REKSS
30" Gas Range Standard
JBS86DKWW
30" Electric Range Convection
JBS66DKWW
30" Electric Range Standard