GE Profile Microwave Parts List
Common Replacement Parts:
- Turntable Motor Assembly
- Magnetron Tube
- High Voltage Capacitor
- Door Switch Assembly
- Control Panel Membrane
- Light Bulb
- Turntable Roller Guide
- Ventilation Fan Motor
Detailed Parts Catalog
- Cooking System Components: Magnetron, waveguide cover, stirrer motor, turntable assembly
- Electrical Components: High voltage transformer, capacitor, diode, fuse
- Control System: Control board, touch panel, display, keypad
- Door Assembly: Door latch, hinges, door seal, window screen
- Ventilation System: Exhaust fan, charcoal filter, vent damper
- Structural Components: Outer case, cavity liner, mounting brackets
- Accessories: Turntable plate, roller guide, grease filters, light cover
Specifications
| Model Series | JVM, PVM, JES Series |
| Type | Over-the-Range & Countertop Microwave Ovens |
| Cavity Capacity | 1.7 - 2.2 cu. ft. |
| Power Output | 1000 - 1650 Watts |
| Voltage Requirements | 120V, 60Hz, 15A |
| Control Type | Touch Controls with LED/LCD Display |
| Turntable Size | 12 - 14 inches diameter |
| Exhaust System | 300 - 400 CFM |
| Dimensions (HxWxD) | 16-17" x 29-30" x 15-16" (Over-the-Range) |
| Weight | 45 - 65 lbs |
| Cooking Modes | Sensor Cooking, Convection, Broil |
| Interior Finish | Stainless Steel, Ceramic Enamel |
Warranty Information
- Full Warranty: 1 year parts and labor
- Magnetron Warranty: 5 years on magnetron tube
- Additional Coverage: Optional extended warranty available
For warranty service, contact GE Appliances Customer Service at 1-800-432-2737 or visit GEAppliances.com
Installation Guide
Mounting Requirements
Proper cabinet dimensions and structural support are essential for safe installation of over-the-range models. Minimum clearance requirements must be followed.
Electrical Requirements
Dedicated 120V, 60Hz, 15-20 amp circuit required. Grounded outlet must be accessible. Do not use extension cords or adapters.
Ventilation Options
Three ventilation modes: external venting, recirculating, or convertible. Proper duct sizing and routing are critical for optimal performance.
Safety Clearances
Minimum clearance from cooking surface: 30 inches for gas ranges, 24 inches for electric ranges. Follow all manufacturer specifications.
Step-by-Step Installation
Preparation
Measure cabinet space, check electrical and ventilation requirements, gather necessary tools
Mounting Template
Use provided template to mark drill holes, ensure level placement, verify stud locations
Install Mounting Plate
Secure mounting plate to wall studs, ensure proper weight support, check level
Electrical Connection
Connect to dedicated circuit, ensure proper grounding, test outlet with voltage tester
Ventilation Setup
Install ductwork, connect vent adapter, select proper ventilation mode
Final Installation
Hang microwave, secure with mounting screws, install grease filters, test operation
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Microwave won't start | Door not closed, control lock activated, faulty door switch | Ensure door latches, check control lock, test door switches |
| No heat but runs | Faulty magnetron, high voltage diode, capacitor issue | Test high voltage components, replace defective parts |
| Turntable not rotating | Turntable motor failure, roller guide obstruction | Replace turntable motor, clean roller guide assembly |
| Sparking inside | Metal object in cavity, damaged waveguide cover | Remove metal objects, replace waveguide cover |
| Unusual noises | Failing stirrer motor, worn fan bearings | Replace stirrer motor, lubricate or replace fan |
| Display not working | Control board failure, loose connections, power issue | Check connections, test control board, verify power |
Error Codes
- F1: Control board failure - Replace main control board
- F2: Temperature sensor failure - Replace sensor assembly
- F3: Door switch error - Check door switch continuity
- F4: Magnetron temperature error - Allow to cool, check sensor
- F5: Keypad error - Check membrane connections
- F6: Communication error - Check wiring harness