Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Wire strippers
- Tape measure
- Voltage tester
Step-by-Step Installation
- Choose Installation Location: Select a location with proper ventilation and adequate clearance from combustible materials.
- Remove Packaging Materials: Remove all shipping materials, protective films, and transit bolts from the range.
- Electrical Connection: Connect to a dedicated 240V, 50A circuit with proper grounding. Hardwired connection required.
- Position the Range: Carefully slide the range into the prepared opening, ensuring it is centered and level.
- Secure the Range: Install anti-tip bracket according to instructions to prevent tipping hazard.
- Check Clearances: Verify minimum clearances: 30" above cooktop, 0" sides to combustible materials.
- Initial Setup: Install oven racks, remove protective materials from induction surface, and perform initial calibration.
- Test Operation: Test all induction elements and oven functions to ensure proper operation.
Specifications
| Model Series | PHP930SLSS |
| Type | Slide-In Induction Range |
| Color | Stainless Steel / Black Stainless |
| Cooktop Type | Induction with 5 Elements |
| Oven Capacity | 5.3 cu. ft. |
| Oven Type | True European Convection |
| Cooktop Power | 3700W Maximum |
| Control Type | Touch Controls with LCD Display |
| Energy Rating | Energy Star Certified |
| Dimensions (HxWxD) | 36.25" x 29.875" x 28.25" |
| Cutout Dimensions | 35.5" x 29.5" x 24" |
| Weight | 185 lbs |
| Power Requirements | 240V, 50A, 60Hz |
Warranty Information
- Full Warranty: 1 year parts and labor
- Cooktop Warranty: 5 years on induction elements
- Oven Warranty: 5 years on convection system
- Additional Coverage: Optional extended warranty available
For warranty service, contact GE Customer Service at 1-800-432-2737 or visit GEAppliances.com
Key Features
Precise Induction Cooking
Induction technology provides instant heat response and precise temperature control from simmer to boil, with energy efficiency up to 90%.
True European Convection
Third heating element and fan provide consistent heat distribution for perfect baking and roasting results with reduced cooking times.
Bridge Element
Combine two induction elements to create a large cooking zone perfect for griddles, roasting pans, and oversized cookware.
Precision Touch Controls
Intuitive touch controls with precise temperature settings from 100°F to 450°F in 5-degree increments for perfect cooking results.
Wi-Fi Connectivity
Connect to the SmartHQ app for remote monitoring, preheating, recipe guidance, and software updates.
Speed Boil Element
3700W power element brings water to boil up to 50% faster than conventional electric elements.
Induction Element Sizes & Power
6" Front Left
1200W - Small pots and simmering
9" Front Right
2100W - Medium pans and sautéing
11" Rear Left
2800W - Large pots and boiling
7" Rear Right
1800W - Medium saucepans
Bridge (11"+9")
3700W - Griddles and oversized cookware
Keep Warm Zone
100°F-200°F - Maintain food temperature
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Induction element not heating | Incompatible cookware, element locked, power issue | Use magnetic stainless steel or cast iron, check control lock, verify power supply |
| Error code F1, F2, F3 | Temperature sensor fault, overheating | Allow to cool, reset circuit breaker, contact service if persists |
| Oven not heating properly | Incorrect mode, door not sealed, heating element failure | Check oven mode, ensure door closure, verify element operation |
| Touch controls unresponsive | Control lock activated, moisture on surface, power issue | Disable control lock, dry surface completely, check power |
| Fan noise during operation | Normal convection fan, cooling fan, foreign object | Normal operation, check for obstructions in fan area |
| Wi-Fi connection issues | Weak signal, incorrect setup, router compatibility | Move router closer, re-run setup, check 2.4GHz network |
Error Codes
- F1/F2/F3: Temperature sensor fault - Reset unit, contact service
- F4: Oven temperature too high - Allow to cool, check ventilation
- F5: Oven temperature too low - Check heating elements
- F6/F7: Induction element fault - Reset, check cookware compatibility
- F8: Communication error - Reset main power
- LOC: Control lock activated - Press and hold Lock button for 3 seconds
Manual Downloads
Current Model Manuals
PHP930SLSS
30" Induction Slide-In Range
PHP930DMBB
30" Induction with Air Fry
PHP9030SJSS
30" Smart Induction Range
PHS930SLSS
30" Induction with Steam
Popular Previous Models
PHS920SLSS
30" Induction Range
PHP920SFSS
30" Freestanding Induction
PHS917SLSS
30" Slide-In Induction
PHP915SJSS
30" Smart Induction