Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pipe wrench
- Gas leak detector solution
- Tape measure
Step-by-Step Installation
- Choose Installation Location: Select a location with proper ventilation, away from combustible materials, on a solid, level floor.
- Remove Shipping Materials: Remove all shipping bolts and packaging materials from the dryer.
- Gas Connection: Connect to a 1/2-inch natural gas supply line using an approved flexible gas connector. Apply pipe thread sealant to all connections.
- Ventilation System: Install a 4-inch diameter metal vent duct to the outside. Avoid sharp bends and keep duct as short as possible.
- Electrical Connection: Connect to a properly grounded 120V, 60Hz, AC only outlet. Do not use an extension cord.
- Level the Dryer: Adjust the leveling legs to ensure the dryer is level from front to back and side to side.
- Test for Gas Leaks: Apply leak detector solution to all gas connections. If bubbles form, there is a leak - tighten connections and retest.
- Test Run: Run the dryer through a complete cycle to check for proper operation and ventilation.
Specifications
| Model Series | GTD72GASJWS |
| Type | Front Load Gas Dryer |
| Color | White / Stainless Steel |
| Capacity | 7.4 cu. ft. |
| Noise Level | 65 dB |
| Control Type | Touch Controls with LED Display |
| Energy Rating | ENERGY STAR® Certified |
| Gas Requirements | Natural Gas, 20,000 BTU |
| Power Requirements | 120V, 60Hz, 15A |
| Dimensions (HxWxD) | 43 x 29 x 31 inches |
| Weight | 125 lbs |
| Vent Size | 4-inch diameter |
Warranty Information
- Full Warranty: 1 year parts and labor
- Motor Warranty: 5 years on dryer motor
- Drum Warranty: Lifetime limited warranty on stainless steel drum
- Additional Coverage: Optional extended warranty available
For warranty service, contact GE Customer Service at 1-800-432-2737 or visit GEAppliances.com
Key Features
Advanced Moisture Sensing
Precision sensors detect moisture levels and automatically adjust drying time, preventing over-drying and saving energy while protecting fabrics.
Steam Refresh Cycle
Steam technology reduces wrinkles and odors, refreshing clothes without washing. Perfect for garments that need a quick freshening up.
Sanitize Cycle
Eliminates 99.9% of common household bacteria and dust mites using high heat, perfect for bedding, towels, and children's items.
Wrinkle Care Option
Automatically tumbles clothes periodically after the cycle ends to help prevent wrinkles from setting in if you can't unload immediately.
SmartDispense™ Technology
Automatically dispenses the right amount of fabric softener at the optimal time during the drying cycle for perfect results every time.
Quick Dry Cycle
Dries small loads in as little as 30 minutes, saving time and energy when you need clothes dried quickly.
Drying Programs Explained
Normal
Standard drying for everyday cotton items like t-shirts, jeans, and towels
Delicates
Gentle low heat drying for delicate fabrics, lingerie, and synthetic blends
Heavy Duty
Extended high heat drying for heavily soiled items, work clothes, and bedding
Quick Dry
Fast drying for small loads or lightly damp items that need quick refreshing
Air Fluff
No heat tumbling to freshen pillows, stuffed animals, or remove pet hair
Wrinkle Prevent
Extended tumbling with occasional bursts of air to prevent wrinkles
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dryer won't start | Power issue, door not closed, gas supply off | Check power supply, ensure door is latched, verify gas valve is open |
| Clothes not drying | Vent clogged, gas supply issue, overloaded | Clean vent system, check gas supply, reduce load size |
| Overheating | Vent restriction, thermostat failure | Clean vent system, contact service technician |
| Gas odor | Gas leak, improper combustion | Immediately turn off gas, ventilate area, contact professional |
| Unusual noises | Foreign objects in drum, worn rollers | Check for foreign objects, contact service for roller replacement |
| Excessive vibration | Unbalanced load, uneven floor | Redistribute load evenly, level the dryer |
Error Codes
- E01: Door switch failure - Check door latch mechanism
- E02: Motor circuit failure - Contact service center
- E03: Temperature sensor failure - Contact service center
- E04: Gas ignition failure - Check gas supply and ignition system
- E05: High temperature limit - Clean vent system, check airflow
- E06: Moisture sensor failure - Clean sensor bars, contact service
Manual Downloads
Current Model Manuals
GTD72GASJWS
7.4 cu. ft. Gas Dryer
GTD65GASJWS
6.5 cu. ft. Gas Dryer
GTD78GASJWS
7.8 cu. ft. Steam Gas Dryer
GTD72GASJSS
7.4 cu. ft. Stainless Steel
Popular Previous Models
DPSB620GW
7.0 cu. ft. Gas Dryer
DPSB620GS
7.0 cu. ft. Steam Gas Dryer
DPSB620GD
7.0 cu. ft. Smart Gas Dryer
DPSB420GW
6.2 cu. ft. Gas Dryer