Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pliers
- 4-inch diameter metal duct clamp
Step-by-Step Installation
- Choose Installation Location: Select a location near electrical connection on a solid, level floor with proper ventilation.
- Remove Shipping Materials: Remove all shipping bolts and packaging materials from the dryer.
- Ventilation Requirements: Install a 4-inch diameter metal exhaust duct. Avoid plastic or foil ducts.
- Connect Exhaust Duct: Connect the exhaust duct to the dryer's exhaust outlet using a metal duct clamp.
- Electrical Connection: Connect to a properly grounded 240V, 60Hz, AC only outlet. Do not use an extension cord.
- Level the Dryer: Adjust the leveling legs to ensure the dryer is level from front to back and side to side.
- Test Run: Run the dryer through a complete cycle to check for proper operation and ventilation.
Specifications
| Model Series | PTD70EBSRWS |
| Type | Electric Dryer |
| Color | Stainless Steel / White |
| Capacity | 7.4 cu. ft. |
| Noise Level | 65 dB |
| Control Type | Touch Controls with LED Display |
| Energy Rating | ENERGY STAR® Certified |
| Power Requirements | 240V, 60Hz, 30A |
| Dimensions (HxWxD) | 43 x 27 x 29 inches |
| Weight | 130 lbs |
| Drum Material | Stainless Steel |
| Vent Type | 4-inch rear exhaust |
Warranty Information
- Full Warranty: 1 year parts and labor
- Motor Warranty: 10 years on drive motor
- Drum Warranty: Lifetime limited warranty on stainless steel drum
For warranty service, contact GE Appliances Customer Service at 1-800-432-2737 or visit GEAppliances.com
Key Features
Advanced Moisture Sensing
Precision sensors detect moisture levels and automatically adjust drying time, preventing over-drying and saving energy.
Steam Refresh
Steam technology reduces wrinkles and odors, refreshing clothes without washing and saving time and water.
Wrinkle Care Option
Tumble clothes without heat at the end of the cycle to help prevent wrinkles from setting in.
Sanitize Cycle
Eliminates 99.9% of common household bacteria and dust mites using high heat for a thorough clean.
SmartDispense™
Automatically dispenses the right amount of dryer sheets based on load size and cycle selection.
Quiet Operation
Sound insulation and vibration reduction technology provide quiet drying performance.
Drying Cycles Explained
Auto Dry
Automatically adjusts drying time based on moisture sensing for optimal results
Timed Dry
Manual drying with selectable time settings from 10 to 180 minutes
Quick Dry
Fast drying for small loads in just 30 minutes
Delicates
Gentle low-heat drying for delicate fabrics and synthetics
Heavy Duty
High-heat drying for heavily soiled items like towels and jeans
Air Fluff
No heat tumbling to freshen pillows, stuffed animals, and delicate items
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dryer won't start | Power issue, door not closed properly, start button not pressed | Check power supply, ensure door is latched completely, press and hold start button |
| Clothes not drying | Overloading, clogged lint filter, restricted exhaust vent | Reduce load size, clean lint filter, check exhaust vent for obstructions |
| Overheating | Clogged lint filter, restricted airflow, thermostat failure | Clean lint filter, check exhaust vent, contact service technician |
| Unusual noises | Foreign objects in drum, worn rollers or bearings | Check for foreign objects, contact service center for parts replacement |
| Vibration during operation | Unbalanced load, uneven floor, shipping bolts not removed | Redistribute load, level the dryer, ensure shipping bolts removed |
| Error codes displayed | Sensor issues, electrical problems, component failures | Refer to error code guide below, contact service if problem persists |
Error Codes
- E01: Door switch failure - Check door latch mechanism
- E02: Motor issue - Contact service center
- E03: Temperature sensor failure - Contact service center
- E04: Heating element issue - Contact service center
- E05: Moisture sensor failure - Clean sensor bars, contact service if persists
- E06: Control board communication error - Reset dryer, contact service if persists
Manual Downloads
Current Model Manuals
PTD70EBSRWS
7.4 cu. ft. Electric Dryer
PTD70EBPRWS
7.4 cu. ft. Gas Dryer
PTD85EBSRWS
8.5 cu. ft. Electric Dryer
PTD85EBPRWS
8.5 cu. ft. Gas Dryer
Popular Previous Models
DPSB620ECW
7.2 cu. ft. Electric Dryer
DPSB620GCW
7.2 cu. ft. Gas Dryer
DPCV880ECW
7.8 cu. ft. Electric Dryer
DPCV880GCW
7.8 cu. ft. Gas Dryer