Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pliers
- Tape measure
- 4-inch diameter rigid metal duct
Step-by-Step Installation
- Choose Installation Location: Select a location near electrical outlet and venting on a solid, level floor. Ensure proper clearance for door opening.
- Remove Shipping Materials: Remove all shipping bolts and packaging materials from the dryer.
- Vent Installation: Connect 4-inch diameter rigid metal duct to dryer exhaust. Keep duct as short and straight as possible with minimal bends.
- Electrical Connection: Connect to a properly grounded 240V, 60Hz outlet. For gas models, connect to gas supply line with approved connector.
- Level the Dryer: Adjust the leveling legs to ensure the dryer is level from front to back and side to side.
- Final Checks: Ensure lint filter is properly installed, door opens and closes smoothly, and all connections are secure.
- Test Run: Run the dryer through a complete cycle to check for proper operation and venting.
Specifications
| Model Series | PTD70EBSRWS |
| Type | Electric Dryer (Gas model available) |
| Color | Stainless Steel / White |
| Capacity | 7.4 cu. ft. |
| Noise Level | 65 dB |
| Control Type | Touch Controls with LED Display |
| Energy Rating | ENERGY STAR® Certified |
| Power Requirements | 240V, 60Hz, 30A (Electric) / 120V, 60Hz (Gas) |
| Dimensions (HxWxD) | 77 x 69 x 75 cm |
| Weight | 75 kg |
| Drum Material | Stainless Steel |
| Vent Type | 4-inch rear exhaust |
Warranty Information
- Full Warranty: 1 year parts and labor
- Motor Warranty: 10 years on dryer motor
- Drum Warranty: Lifetime limited warranty on stainless steel drum
- Additional Coverage: Optional extended warranty available
For warranty service, contact GE Appliances Customer Service at 1-800-432-2737 or visit GEAppliances.com
Key Features
Advanced Moisture Sensing
Precision sensors detect moisture levels and automatically adjust drying time, preventing over-drying and saving energy while protecting fabrics.
Steam Refresh
Steam technology reduces wrinkles and odors, refreshing clothes without washing. Perfect for garments that need a quick refresh between wears.
Sanitize Cycle
Eliminates 99.9% of common household bacteria and dust mites using high heat, perfect for bedding, towels, and children's items.
Wrinkle Care
Automatically tumbles clothes periodically after cycle completion to help prevent wrinkles from setting in if you can't unload immediately.
SmartDispense™
Automatically dispenses the perfect amount of fabric softener for each load, ensuring optimal results without waste or residue buildup.
Quiet Operation
Sound insulation and precision engineering reduce operating noise, making it ideal for open floor plans and multi-use spaces.
Drying Programs Explained
Auto Dry
Automatically senses moisture and adjusts drying time for optimal results
Time Dry
Manual time setting from 10 to 180 minutes for complete control
Quick Dry
Fast drying for small loads or lightly damp items (20-40 minutes)
Delicates
Low heat gentle drying for delicate fabrics and synthetic materials
Heavy Duty
High heat setting for towels, jeans, and heavily soiled items
Air Fluff
No heat tumbling to freshen pillows, stuffed animals, and dry clean only items
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dryer won't start | Power issue, door not closed properly, start button not pressed | Check power supply, ensure door is latched completely, press and hold start button for 3 seconds |
| Clothes not drying | Lint filter clogged, vent restricted, overloaded | Clean lint filter, check vent system for obstructions, reduce load size |
| Overheating | Vent blockage, lint buildup, thermistor failure | Clean vent system thoroughly, check thermistor, ensure proper airflow |
| Unusual noises | Foreign objects in drum, worn rollers or bearings, unbalanced load | Check for foreign objects, inspect drum rollers, redistribute load evenly |
| Error codes displayed | Sensor issues, heating problems, door switch failure | Refer to error code list below, reset dryer, contact service if persistent |
| Vibration during operation | Unbalanced load, uneven floor, shipping bolts not removed | Redistribute load, level the dryer, ensure shipping bolts removed |
Error Codes
- E01: Door switch failure - Check door latch and switch
- E02: Motor issue - Contact service center
- E03: Temperature sensor failure - Check thermistor connections
- E04: Heating element issue - Check heating element and thermal fuse
- E05: Moisture sensor error - Clean moisture sensor bars
- E06: Control board communication error - Reset dryer, contact service
Manual Downloads
Current Model Manuals
PTD70EBSRWS
7.4 cu. ft. Electric Dryer
PTD70GBSRWS
7.4 cu. ft. Gas Dryer
PTD65EBSRWS
6.5 cu. ft. Electric Dryer
PTD65GBSRWS
6.5 cu. ft. Gas Dryer
Popular Previous Models
DPSB620ECW
7.2 cu. ft. Electric Dryer
DPSB620GCW
7.2 cu. ft. Gas Dryer
DPSB480ECW
6.8 cu. ft. Electric Dryer
DPSB480GCW
6.8 cu. ft. Gas Dryer