Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pliers
- Tape measure
Step-by-Step Installation
- Choose Installation Location: Select a location near necessary plumbing and electrical connections on a solid, level floor.
- Remove Shipping Materials: Remove all shipping bolts and packaging materials from the washing machine.
- Connect Water Supply: Connect hot and cold water supply lines to the water inlet valves. Use only new hoses.
- Connect Drain Hose: Route the drain hose into a standpipe or laundry tub with a high loop to prevent backflow.
- Electrical Connection: Connect to a properly grounded 120V, 60Hz, AC only outlet. Do not use an extension cord.
- Level the Washing Machine: Adjust the leveling legs to ensure the washing machine is level from front to back and side to side.
- Test Run: Run the washing machine through a complete cycle to check for leaks and proper operation.
Specifications
| Model Series | GPW950 |
| Type | Front Load Washing Machine |
| Color | Stainless Steel / Graphite |
| Capacity | 9.0 kg |
| Noise Level (Wash/Spin) | 52 dB / 68 dB |
| Control Type | Touch Controls with LED Display |
| Energy Rating | A++ (Highly Efficient) |
| Water Consumption | 8,500 L/year |
| Power Requirements | 230V, 50Hz, 10A |
| Dimensions (HxWxD) | 84 x 60 x 58 cm |
| Weight | 65 kg |
| Max Spin Speed | 1300 RPM |
Warranty Information
- Full Warranty: 2 years parts and labor
- Motor Warranty: 5 years on Direct Drive Motor
- Additional Coverage: Optional extended warranty available
For warranty service, contact GE Customer Service at 1-800-432-2737 or visit GEAppliances.com
Key Features
UltraFresh Vent System
GE's innovative vent system with OdorBlock™ technology keeps the washer fresh by allowing air to circulate, preventing mildew and odors between loads.
SmartDispense Technology
Automatically dispenses the perfect amount of detergent, bleach, and fabric softener for up to 32 loads, eliminating guesswork and waste.
Microban® Antimicrobial Technology
Built-in antimicrobial protection in the washer tub and dispenser helps prevent the growth of odor-causing bacteria, mold, and mildew.
Steam Refresh Cycle
Steam technology helps remove wrinkles and odors from clothes, refreshing garments without a full wash cycle.
SmartHQ Technology
Wi-Fi enabled for remote control via smartphone app, allowing you to start cycles, monitor progress, and receive notifications from anywhere.
Quick Wash
This feature saves time by washing a normal load in just 30 minutes using optimized water levels and wash motions for efficient cleaning.
Wash System Technology Explained
Deep Fill
Allows you to add more water for heavily soiled loads or bulky items
Stainless Steel Drum
Gentle on fabrics while providing durability and resistance to rust
Precision Dispense
Automatically releases additives at the optimal time during the cycle
Sanitize Cycle
Eliminates 99.9% of common household bacteria with hot water and steam
Allergen Cycle
Removes over 95% of common household allergens like pet dander and dust mites
Delay Start
Program the washer to start at a later time for convenience and energy savings
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Washer won't start | Power issue, door not closed properly, control lock activated | Check power supply, ensure door is latched completely, check control lock |
| Clothes still dirty after cycle | Overloading, incorrect detergent amount, wrong cycle selection | Reduce load size, use recommended detergent, select Heavy Duty cycle |
| Water not draining | Drain hose clogged, drain pump filter blocked | Check drain hose for obstructions, clean drain pump filter |
| Water leaking | Door seal damaged, over-sudsing, loose water connections | Inspect door seal, reduce detergent amount, check all connections |
| Unusual noises during operation | Foreign objects in drum, unbalanced load, shipping bolts not removed | Check drum for objects, redistribute load, ensure shipping bolts removed |
| Excessive vibration | Uneven floor, unbalanced load, leveling feet not adjusted | Level the machine, redistribute load, adjust leveling feet |
Error Codes
- E01: Water fill error - Check water supply and inlet valve
- E02: Drain error - Check drain hose and pump
- E03: Unbalanced load - Redistribute clothes and restart
- E04: Door lock error - Ensure door is fully closed and latched
- E05: Motor control error - Contact service center
- E06: Temperature sensor error - Contact service center
Manual Downloads
Current Model Manuals
GPW950
9.0kg Profile Washer
GPW850
8.5kg Steam Washer
GPW750
7.5kg SmartHQ Washer
GPW950G
9.0kg Graphite Washer
Popular Previous Models
GFW850
8.5kg Front Load Washer
GFW750
7.5kg Energy Star Washer
GFW650
6.5kg Compact Washer
GFW550
5.5kg Apartment Washer