Installation Guide
Tools Needed:
- Adjustable wrench
- Gas leak detector solution
- Screwdrivers (flat and Phillips)
- Pipe wrench
- Level
- Tape measure
Step-by-Step Installation
- Choose Installation Location: Select a well-ventilated area with proper gas line access and on a solid, level floor.
- Remove Shipping Materials: Remove all shipping bolts and packaging materials from the dryer.
- Connect Gas Supply: Connect gas line to dryer using approved flexible gas connector. Apply pipe thread sealant to all connections.
- Check for Gas Leaks: Apply leak detector solution to all gas connections. Bubbles indicate leaks that must be repaired.
- Connect Venting: Install rigid metal venting to exterior. Avoid plastic or foil vent materials.
- Electrical Connection: Connect to a properly grounded 120V, 60Hz, AC only outlet. Do not use an extension cord.
- Level the Dryer: Adjust the leveling legs to ensure the dryer is level from front to back and side to side.
- Test Run: Run the dryer through a complete cycle to check for proper operation and ventilation.
Specifications
| Model Series | GTD42EASJ2WW |
| Type | Gas Dryer |
| Color | White |
| Capacity | 7.2 cu. ft. |
| Heat Source | Natural Gas / LP Gas |
| Control Type | Electronic Controls with LED Display |
| Energy Rating | ENERGY STAR® Certified |
| Gas Consumption | 22,000 BTU/hr |
| Power Requirements | 120V, 60Hz, 15A |
| Dimensions (HxWxD) | 44 x 27 x 29 inches |
| Weight | 125 lbs |
| Vent Size | 4-inch diameter |
Warranty Information
- Full Warranty: 1 year parts and labor
- Drum Warranty: Lifetime limited warranty on stainless steel drum
- Burner Assembly: 5 years parts
- Additional Coverage: Optional extended warranty available
For warranty service, contact GE Customer Service at 1-800-432-2737 or visit GEAppliances.com
Key Features
Advanced Moisture Sensing
Automatically senses when clothes are dry and shuts off, preventing over-drying and saving energy while protecting fabrics.
Sanitize Cycle
Eliminates 99.9% of common household bacteria and germs using high heat, perfect for bedding and towels.
Wrinkle Care Option
Tumbles clothes without heat at the end of the cycle to help prevent wrinkles if you can't unload immediately.
Quick Dry Cycle
Dries small loads in as little as 30 minutes, perfect for when you need specific items dried quickly.
Stainless Steel Drum
Durable stainless steel construction resists rust and chipping, and is gentle on all fabric types.
EcoDry™ Technology
Optimizes drying time and temperature to use less energy while still delivering excellent drying performance.
Drying Cycles Explained
Normal
For everyday cotton items like t-shirts, jeans, and towels
Permanent Press
Medium heat with cool-down period to reduce wrinkles
Delicates
Low heat gentle cycle for delicate fabrics and synthetics
Heavy Duty
High heat for heavily soiled items like work clothes
Air Fluff
No heat for freshening pillows or drying non-washable items
Timed Dry
Manual control for specific drying times from 10-120 minutes
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dryer won't start | Power issue, door not closed, start button not held | Check power supply, ensure door is latched, hold start button for 3 seconds |
| No heat | Gas supply off, thermal fuse blown, igniter failure | Check gas valve, test thermal fuse, inspect igniter |
| Takes too long to dry | Clogged lint filter, restricted venting, overloading | Clean lint filter, check vent system, reduce load size |
| Gas odor | Gas leak, improper combustion | Immediately turn off gas, ventilate area, call technician |
| Unusual noises | Foreign objects in drum, worn rollers or bearings | Check for foreign objects, inspect drum support system |
| Clothes too hot | Over-drying, cooling system failure | Use moisture sensing cycle, check cooling fan and vent |
Error Codes
- E01: Door switch failure - Check door switch and wiring
- E21: Thermal fuse open - Replace thermal fuse
- E23: Temperature sensor failure - Check thermistor
- E31: Motor triac error - Check motor and control board
- E41: Gas ignition failure - Check gas supply and igniter
- E61: Control panel communication error - Check wiring harness
Manual Downloads
Current Model Manuals
GTD42EASJ2WW
7.2 cu. ft. Gas Dryer
GTD45EASJ2WW
7.4 cu. ft. Gas Dryer
GTD48EASJ2WW
7.8 cu. ft. Smart Gas Dryer
GTD33EASK0WW
6.7 cu. ft. Compact Gas Dryer
Popular Previous Models
DPSB620EC2WW
7.0 cu. ft. Gas Dryer
DPSX480EC2WW
7.2 cu. ft. Steam Gas Dryer
DSKS333EC2WW
6.7 cu. ft. Stackable Gas Dryer
DCLP333EC2WW
6.7 cu. ft. Laundry Center Gas Dryer