Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pliers
- Tape measure
- 4-inch duct clamps
Step-by-Step Installation
- Choose Installation Location: Select a location with proper ventilation, near electrical outlet, and on a solid, level floor.
- Remove Shipping Materials: Remove all shipping bolts, tapes, and packaging materials from the dryer.
- Ventilation Setup: Connect 4-inch diameter metal duct to dryer exhaust outlet. Ensure duct is as straight and short as possible.
- Electrical Connection: Connect to a properly grounded 240V, 60Hz, 30A outlet. Do not use an extension cord or adapter.
- Gas Connection (if applicable): For gas models, connect to gas supply using approved flexible gas connector. Check for leaks with soap solution.
- Level the Dryer: Adjust the leveling legs to ensure the dryer is level from front to back and side to side.
- Test Run: Run the dryer through a complete cycle to check for proper operation and ventilation.
Specifications
| Model Number | DBXR463EBOWW |
| Type | Electric Dryer |
| Color | White |
| Capacity | 7.3 cu. ft. |
| Noise Level | 65 dB |
| Control Type | Electronic Touch Controls |
| Energy Rating | ENERGY STAR® Certified |
| Power Requirements | 240V, 60Hz, 30A |
| Dimensions (HxWxD) | 43 x 27 x 29 inches |
| Weight | 125 lbs |
| Drum Material | Stainless Steel |
| Vent Type | 4-inch rear exhaust |
Warranty Information
- Full Warranty: 1 year parts and labor
- Drum Warranty: 10 years on stainless steel drum
- Motor Warranty: 5 years on drive motor
- Additional Coverage: Optional extended warranty available
For warranty service, contact GE Customer Service at 1-800-432-2737 or visit GEAppliances.com
Key Features
Advanced Moisture Sensing
Automatically detects moisture levels and adjusts drying time to prevent over-drying, saving energy and protecting fabrics.
Wrinkle Care Option
Tumbles clothes without heat at the end of the cycle to help reduce wrinkles if clothes aren't removed immediately.
Sanitize Cycle
Uses high temperatures to eliminate 99.9% of common household bacteria, perfect for bedding and towels.
Quiet Operation
Sound insulation and vibration reduction technology provide quiet drying performance.
Large Capacity Drum
7.3 cubic foot capacity handles large loads including comforters and bedding with ease.
Multiple Dryness Levels
Choose from 5 different dryness levels to match your fabric type and preference.
Cycle Options Explained
Normal
For everyday cotton items like t-shirts, jeans, and towels
Delicates
Low heat gentle cycle for synthetic fabrics and delicate items
Heavy Duty
High heat extended cycle for heavily soiled items and bedding
Quick Dry
30-minute cycle for lightly worn items that need refreshing
Air Fluff
No heat cycle for fluffing pillows or drying non-washable items
Steam Refresh
Reduces wrinkles and odors in already dry clothing
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dryer won't start | Power issue, door not closed, circuit breaker tripped | Check power supply, ensure door is latched, reset circuit breaker |
| No heat | Heating element failure, thermal fuse blown, thermostat issue | Check heating element, test thermal fuse, verify thermostat operation |
| Clothes taking too long to dry | Lint filter clogged, vent blocked, overloaded | Clean lint filter, check vent system, reduce load size |
| Dryer is noisy | Foreign objects in drum, worn rollers or bearings | Check for foreign objects, inspect drum rollers and bearings |
| Dryer stops during cycle | Overheating, door switch failure, motor thermal protector | Check ventilation, test door switch, allow motor to cool |
| Error codes displayed | Sensor failure, control board issue, wiring problem | Refer to error code chart, check connections, reset dryer |
Error Codes
- E01: Door switch failure - Check door switch and wiring
- E02: Motor circuit failure - Check motor and related components
- E03: Temperature sensor failure - Replace temperature sensor
- E04: Heating element failure - Check heating element and connections
- E05: Control board communication error - Reset dryer or replace control board
- E06: Moisture sensor failure - Clean or replace moisture sensor
Manual Downloads
Current Model Manuals
DBXR463EBOWW
7.3 cu. ft. Electric Dryer
DBXR463EB0WW
7.3 cu. ft. Gas Dryer
DBXR463EB1WW
7.3 cu. ft. Steam Dryer
DBXR463EB2WW
7.3 cu. ft. Smart Dryer
Popular Previous Models
DBXR453EBWWW
7.0 cu. ft. Electric Dryer
DBXR443EBWWW
6.8 cu. ft. Gas Dryer
DBXR433EBWWW
6.5 cu. ft. Electric Dryer
DBXR423EBWWW
6.2 cu. ft. Gas Dryer