Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pliers
- Tape measure
- Voltage tester
Step-by-Step Installation
- Choose Installation Location: Select a location with proper ventilation and access to necessary electrical and gas connections.
- Remove Packaging Materials: Remove all shipping materials, protective films, and transit bolts from the appliance.
- Gas Connection (if applicable): Connect to proper gas supply line using approved connectors. Check for leaks with soap solution.
- Electrical Connection: Connect to a properly grounded 240V, 60Hz, dedicated circuit. Do not use an extension cord.
- Ventilation Setup: Install proper ventilation hood according to local building codes and manufacturer specifications.
- Level the Appliance: Adjust the leveling legs to ensure the appliance is perfectly level from front to back and side to side.
- Initial Setup: Install racks, configure settings, and perform initial calibration as per manual instructions.
- Test Operation: Run the appliance through initial test cycles to check for proper operation and leaks.
Specifications
| Model Series | CGS990SETSS |
| Type | Professional Range with Convection Oven |
| Color | Stainless Steel / Matte Black |
| Fuel Type | Dual Fuel (Gas Cooktop, Electric Oven) |
| Burner Output | 20,000 BTU (Front), 18,000 BTU (Rear) |
| Oven Capacity | 5.0 cu.ft. |
| Control Type | Touch Controls with LCD Display |
| Energy Rating | Energy Star Certified |
| Power Requirements | 240V, 50A (Oven), 120V, 15A (Cooktop) |
| Dimensions (HxWxD) | 91 x 76 x 61 cm |
| Weight | 120 kg |
| Warranty Period | 1 Year Full, 5 Years Parts |
Warranty Information
- Full Warranty: 1 year parts and labor
- Extended Warranty: 5 years on major components
- Additional Coverage: Optional extended warranty available
- Professional Installation: Required for warranty validation
For warranty service, contact GE Cafe Customer Service at 1-800-432-2733 or visit GEApliances.com
Key Features
Precision Cooking System
Advanced temperature control with dual convection fans ensures even heat distribution and precise cooking results for professional-quality meals.
Smart Burner Technology
High-performance burners with precise flame control from simmer to boil, featuring quick ignition and consistent heat output.
Touch Screen Controls
Intuitive touch screen interface with programmable cooking modes, temperature probes, and Wi-Fi connectivity for remote monitoring.
Air Fry Capability
Built-in air fry function uses convection technology to crisp foods with little to no oil, providing healthier cooking options.
SmartHQ Technology
Wi-Fi enabled for remote control via smartphone app, allowing you to preheat, monitor cooking progress, and receive completion alerts.
Self-Cleaning Oven
High-temperature self-cleaning cycle eliminates the need for chemical cleaners, maintaining oven performance and hygiene.
Cooking Modes Explained
Convection Bake
Even heat distribution for perfect baking results with multiple racks
Convection Roast
Combination of convection and broil for crispy, evenly cooked meats
Proof Mode
Precise temperature control for perfect dough rising conditions
Slow Cook
Low-temperature cooking for tenderizing meats and developing flavors
Air Fry
High-speed convection for crispy fried foods with minimal oil
Warm Mode
Maintains food at serving temperature without overcooking
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Burner won't ignite | Gas supply issue, clogged burner, ignition problem | Check gas supply, clean burner ports, check ignition system |
| Uneven cooking | Improper rack placement, oven not level, calibration needed | Use correct rack positions, level appliance, recalibrate oven |
| Oven not heating | Power issue, heating element failure, control board problem | Check power supply, inspect heating elements, reset circuit breaker |
| Error codes displayed | Sensor failure, communication error, component malfunction | Note error code, consult manual, perform recommended reset |
| Touch screen unresponsive | Power surge, software glitch, physical damage | Reset appliance, update software, check for physical damage |
| Unusual odors | Manufacturing residues, food spills, ventilation issue | Run self-clean cycle, clean interior, check ventilation |
Error Codes
- F1: Oven temperature sensor failure - Check sensor connection
- F2: Oven over-temperature - Allow to cool, check ventilation
- F3: Door lock mechanism issue - Check door alignment and lock
- F4: Control board communication error - Reset appliance
- F5: Ignition failure - Check gas supply and ignition system
- F6: Touch panel error - Reset control panel
- F7: Convection fan motor issue - Check fan operation
- F8: Wi-Fi connectivity problem - Check network settings
Manual Downloads
Current Model Manuals
CGS990SETSS
30" Dual Fuel Range
CGS950SETSS
30" Gas Range
CGS980SETSS
36" Dual Fuel Range
CGS760SETSS
30" Electric Range
Popular Previous Models
CGS750SETSS
30" Slide-In Range
CGS700SETSS
30" Freestanding Range
CGS650SETSS
30" Induction Range
CGS500SETSS
30" Basic Range