GE Cafe Induction Range Double Oven

User Manual & Installation Guide

Double Oven Induction Range

Installation Guide

Tools Needed:

  • Adjustable wrench
  • Level
  • Screwdrivers (flat and Phillips)
  • Pliers
  • Tape measure
  • Voltage tester

Step-by-Step Installation

  1. Choose Installation Location: Select a location with proper ventilation and adequate clearance from combustible materials.
  2. Remove Shipping Materials: Remove all protective films, tapes, and shipping supports from the range.
  3. Electrical Connection: Connect to a dedicated 240V, 50A circuit with proper grounding. Must be installed by a licensed electrician.
  4. Anti-Tip Bracket Installation: Secure the anti-tip bracket to the floor or wall according to instructions to prevent tipping.
  5. Position the Range: Carefully slide the range into position, ensuring it's level and properly aligned with cabinets.
  6. Connect Ventilation: For models with downdraft ventilation, connect ductwork according to local codes.
  7. Initial Setup: Install oven racks, remove any protective materials from induction surface, and perform initial calibration.
  8. Test Operation: Test all burners, oven functions, and induction elements to ensure proper operation.
Warning: All electrical installations must be performed by a qualified electrician. Gas connections (if applicable) must be made by a licensed professional.

Specifications

Model Series C2S950P2MS1
Type Double Oven Induction Range
Color Stainless Steel / Matte Black
Cooktop Type Induction
Number of Elements 5 Induction Elements
Upper Oven Capacity 2.7 cu. ft.
Lower Oven Capacity 4.6 cu. ft.
Total Oven Capacity 7.3 cu. ft.
Control Type Touch Controls with LCD Display
Power Requirements 240V, 50A, 60Hz
Dimensions (HxWxD) 91.4 x 76.2 x 61 cm
Weight 102 kg
Convection Oven Yes (Both Ovens)
Self-Cleaning Yes (Pyrolytic)

Warranty Information

  • Full Warranty: 1 year parts and labor
  • Cooktop Warranty: 5 years on induction elements
  • Oven Warranty: 5 years on oven cavity
  • Additional Coverage: Optional extended warranty available

For warranty service, contact GE Customer Service at 1-800-432-2737 or visit GEAppliances.com

Key Features

Precise Induction Cooking

Five induction elements provide instant heat response and precise temperature control, with power levels from 100W to 3700W for versatile cooking.

True European Convection

Both ovens feature true convection with a third heating element and fan for even heat distribution and faster cooking times.

Double Oven Design

Independent upper and lower ovens allow simultaneous cooking at different temperatures, perfect for holiday meals and entertaining.

Wi-Fi Connect

Connect to your home network for remote monitoring, control via smartphone app, and access to software updates and new cooking features.

Precision Cooking Probes

Includes two meat probes that connect to the oven for precise temperature monitoring and automatic shut-off when desired doneness is reached.

Air Fry Capability

Special air fry mode in the upper oven uses convection technology to crisp foods with little to no oil for healthier cooking.

Cooking Modes Explained

True Convection Bake

Even baking with fan-assisted heat circulation for perfect results

Convection Roast

High heat with convection for crispy exteriors and juicy interiors

Proof

Maintains ideal temperature and humidity for dough rising

Warm

Keeps cooked foods at serving temperature without drying out

Air Fry

Crisps foods using high-velocity hot air with minimal oil

Slow Cook

Low temperature cooking for tenderizing tough cuts of meat

Troubleshooting

Problem Possible Cause Solution
Induction element not heating Incompatible cookware, incorrect pan size Use magnetic stainless steel or cast iron cookware, ensure pan covers element
Oven not heating properly Incorrect temperature setting, door not sealed Verify temperature setting, check door seal for damage
Error code displayed System fault, sensor issue Note error code and consult manual, power cycle appliance
Uneven cooking results Oven not level, incorrect rack position Level the range, use recommended rack positions
Touch controls unresponsive Control lock activated, moisture on panel Deactivate control lock, dry control panel completely
Self-clean not working Door not locked, temperature too high Ensure door locks properly, wait for oven to cool

Error Codes

  • F1: Oven temperature sensor fault - Contact service
  • F2: Oven over-temperature - Allow to cool, check ventilation
  • F3/F4: Induction element fault - Check cookware, reset circuit
  • F5: Control panel communication error - Power cycle appliance
  • F7: Door lock mechanism fault - Check door alignment
  • F8: Wi-Fi connection error - Check network settings

Manual Downloads

Current Model Manuals

C2S950P2MS1

30" Double Oven Induction Range

C2S950P2MW2

30" Double Oven Induction (White)

C2S960P2MS1

36" Double Oven Induction Range

C2S940P2MS1

30" Single Oven Induction Range

Popular Previous Models

CGS990SET2SS

30" Slide-In Induction Range

C2S900P2MS1

30" Double Oven (Previous Gen)

PHS930YPFS

30" Induction Range with Griddle

CGS750P2MS1

30" Gas Double Oven Range

Note: For models not listed here, please visit the GE Appliances Support Website for complete documentation.