Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pliers
- Tape measure
- Drill with bits
Step-by-Step Installation
- Choose Installation Location: Select a location near kitchen plumbing and electrical connections with proper cabinet dimensions.
- Remove Shipping Materials: Remove all shipping bolts, brackets, and packaging materials from the dishwasher.
- Connect Water Supply: Connect hot water supply line to the dishwasher inlet valve using a new braided stainless steel hose.
- Connect Drain Hose: Route the drain hose into the sink drain or garbage disposal with a high loop to prevent backflow.
- Electrical Connection: Connect to a dedicated 120V, 60Hz, 15-amp circuit with proper grounding. Follow local electrical codes.
- Level the Dishwasher: Adjust the leveling legs to ensure the dishwasher is level from front to back and side to side.
- Secure to Countertop: Attach mounting brackets to the underside of the countertop to secure the dishwasher in place.
- Test Run: Run the dishwasher through a complete cycle to check for leaks and proper operation.
Specifications
| Model Series | CDT845P2NS1 |
| Type | Built-in Dishwasher |
| Color | Stainless Steel / Matte Black |
| Place Settings | 16 Place Settings |
| Noise Level | 44 dB (Quiet Operation) |
| Control Type | Hidden Touch Controls with LED Display |
| Energy Rating | ENERGY STAR® Certified |
| Water Consumption | 2.9 gallons per cycle (Normal Wash) |
| Power Requirements | 120V, 60Hz, 15A |
| Dimensions (HxWxD) | 34.5 x 23.75 x 24 inches |
| Weight | 95 lbs |
| Wash Cycles | 8 Wash Cycles + 5 Options |
Warranty Information
- Full Warranty: 1 year parts and labor
- Motor Warranty: 10 years on Direct Drive Motor
- Racks and Tub: Lifetime limited warranty
- Additional Coverage: Optional extended warranty available
For warranty service, contact GE Appliances Customer Service at 1-800-432-2737 or visit GEAppliances.com
Key Features
Direct Drive Motor
GE's innovative Direct Drive motor connects directly to the wash arm without belts or gears, reducing noise and increasing reliability with fewer moving parts.
Third Rack Design
Extra upper rack provides additional space for utensils, cooking tools, and small items, maximizing loading capacity and organization.
Advanced Soil Sensor
Intelligent sensor technology detects soil levels and adjusts water temperature, cycle time, and wash action for optimal cleaning and energy efficiency.
Steam Prewash
Steam technology helps to loosen tough, baked-on food before the main wash cycle, reducing the need for pre-rinsing and hand washing.
Wi-Fi Connect
SmartHQ enabled for remote control via smartphone app, allowing you to monitor cycle status, receive alerts, and download additional cycles.
Sanitize Cycle
NSF certified sanitize cycle uses high-temperature final rinse to eliminate 99.999% of bacteria on dishes for hygienically clean results.
Wash Cycles Explained
Normal Wash
For everyday cleaning of normally soiled dishes with optimal water and energy use
Heavy Wash
Intensive cleaning for pots, pans, and heavily soiled dishes with baked-on food
Light Wash
Quick cycle for lightly soiled dishes or glassware with reduced water consumption
Rinse Only
Rinses dishes to prevent drying of food particles until a full load is ready
China/Crystal
Gentle cycle for delicate china, crystal, and fine glassware with lower water pressure
Auto Sense
Automatically adjusts cycle based on soil sensor detection for optimal cleaning
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dishwasher won't start | Power issue, door not closed properly, child lock engaged | Check power supply, ensure door is latched completely, check child lock |
| Poor cleaning results | Overloading, wrong detergent, clogged spray arms, low water temperature | Properly load dishes, use recommended detergent, clean spray arms, check water heater |
| Water not draining | Drain hose clogged or kinked, food filter blocked | Check drain hose for obstructions, clean food filter and drain basket |
| Leaking water | Door not sealed, overfilling, loose connections, worn door gasket | Check door seal, ensure proper detergent amount, check connections, inspect gasket |
| Unusual noises | Foreign objects in pump, spray arm hitting dishes, worn motor bearings | Check for foreign objects, rearrange dishes, contact service if persistent |
| Dishes not drying | Rinse aid empty, high humidity rinse selected, plastic items | Refill rinse aid, use heated dry option, place plastic on top rack |
Error Codes
- F1: Water fill issue - Check water supply and inlet valve
- F2: Drain issue - Check drain hose and pump
- F3: Water temperature issue - Check water heater and temperature sensor
- F4: Motor issue - Contact service center
- F5: Door not closed properly - Ensure door is fully closed and latched
- F6: Overflow detected - Check for leaks and water supply valve
- F7: Heater issue - Contact service center
- F8: Control panel communication error - Reset dishwasher
Manual Downloads
Current Model Manuals
CDT845P2NS1
Cafe Series Built-in Dishwasher
CDT845P2NW2
Cafe Series with WiFi Connect
CDT875P2NS1
Cafe Series Top Control
CDT855P2NS1
Cafe Series Panel Ready
Popular Previous Models
GDT655SSJSS
Cafe Series Stainless Steel
GDT695SSJSS
Cafe Series with Third Rack
PDT845SSFSS
Cafe Series Front Control
GDT580SSFSS
Cafe Series Standard